This dataset includes point estimates of groundwater recharge in mm/year. Recharge rates have been estimated at monitoring bore locations in the basaltic aquifers of the Nulla and McBride basalt provinces. Recharge estimates have been calculated using the “chloride mass balance” method. The chloride mass balance process assumes that the chloride ion is a conservative tracer in precipitation, evapotranspiration, recharge and runoff; and that all the chloride is from rainfall, instead of for example halite saturation or dissolution processes. So the volumetric water balance and the flux of chloride balance must both be true. Assuming that runoff and evapotranspiration are negligible (so approximated by zero), the equation is simplified: Water balance P=ET+R+Q Water balance multiplied by chloride concentrations (chloridefluxbalance) P∙Cl_ppt=ET∙Cl_ET+R∙Cl_gw+Q∙Cl_riv | ΔCl_reac≈0 Assumptions to simplify equation P∙Cl_ppt=R∙Cl_gw | Q≈0 & ET≈0 Rearranging for recharge rate (unknown) R=P∙(Cl_ppt)/(Cl_gw ) | Q≈0 & ET≈0 Where P = precipitation rate; ET = evapotranspiration rate; R = recharge rate; Q = runoff to streams; Clppt = concentration of Cl in precipitation; ClET = concentration of chloride in evapotranspiration; Clgw = concentration of Cl in groundwater; Clriv = concentration of chloride in river runoff; ΔClreac = change in chloride concentrations from reactions.

The Exploring for the Future program Showcase 2022 was held on 8-10 August 2022. Day 2 (9th August) included talks on two themes moderated by Marina Costelloe. Data and toolbox theme: - Data acquisition progress - Dr Laura Gow - Quantitative tool development: HiQGA.jl and HiPerSeis - Dr Anandaroop Ray - Data delivery advances: Underpinned by careful data curation - Mark Webster Geology theme: - Mapping Australia's geology: From the surface down to great depths - Dr Marie-Aude Bonnardot - Towards a national understanding of Groundwater - Dr Hashim Carey - Uncovering buried frontiers: Tennant Creek to Mount Isa - Anthony Schofield and Dr Chris Carson - Lithospheric characterisation: Mapping the depths of the Australian tectonic plate - Dr Marcus Haynes You can access the recording of the talks from YouTube here: Showcase Day 2 – Part 1 https://youtu.be/US6C-xzMsnI Showcase Day 2 – Part 2 https://youtu.be/ILRLXbQNnic

This service delivers the base of Cenozoic surface and Cenozoic thickness grids for the west Musgrave province. The gridded data are a product of 3D palaeovalley modelling based on airborne electromagnetic conductivity, borehole and geological outcrop data, carried out as part of Geoscience Australia's Exploring for the Future programme. The West Musgrave 3D palaeovalley model report and data files are available at https://dx.doi.org/10.26186/149152.

Demand for critical minerals, vital for advanced technologies, is increasing. This study shows that Australia’s richly endowed geological provinces contain numerous undeveloped or abandoned mineral occurrences that could potentially lead to new economic resources. Three study areas were assessed for critical mineral occurrences through database interrogation and literature review, namely the Barkly-Isa-Georgetown (BIG), Darling-Curnamona-Delamerian (DCD) and Officer-Musgrave (OM) project areas. The study found approximately 20,000 mineral occurrences across the three areas, with just over half occurring in the DCD region. Critical minerals were recognised in ~10% of all occurrences in BIG, ~10% in DCD and 70% in OM. Gold and base metal occurrences comprise 48% (OM), 81% (DCD) and 82% (BIG) of all occurrences in the study areas, with these metals in the DCD and BIG historically and presently important. This large-scale analysis and literature review of Australia’s forgotten mineral discoveries identifies potential new sources of critical minerals and, with the addition of mineralisation style to the data, contributes to predictive exploration methodology that will further unlock the nation’s critical mineral potential. These data are available through the Exploring for the Future portal (https://portal.ga.gov.au/persona/eftf). <b>Citation:</b> Kucka C., Senior A. & Britt A., 2022. Mineral Occurences: Forgotten discoveries providing new leads for mineral supply. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://dx.doi.org/10.26186/146983

This web service provides access to datasets produced by the mineral potential assement of iron oxide-copper-gold (IOCG) mineral systems in the Tennant Creek – Mt Isa region. The mineral potential assessment uses a 2D, GIS-based workflow to qualitatively map four key mineral system components: (1) Sources of metals, fluids and ligands, (2) Energy to drive fluid flow, (3) Fluid flow pathways and architecture, and (4) Deposition mechanisms, such as redox or chemical gradients. For each of these key mineral system components theoretical criteria, representing important ore-forming processes, were identified and translated into mappable proxies using a wide range of input datasets. Each of these criteria are weighted and combined using an established workflow to produce the final map of IOCG potential.

To unlock the potential of one of the largest underexplored onshore areas in Australia, the Exploring for the Future Officer-Musgrave project is delivering a wide array of publicly available new analyses and data. The collection of new AEM data, as well as the reprocessing of existing industry acquired AEM data is expected to improve the understanding of groundwater systems in the Officer-Musgrave region. New regional scale data acquisition and analysis, including stratigraphic, petrophysical and geomechanical studies from existing wells, focus on advancing understanding of petroleum systems elements and assist the exploration and evaluation of conventional and unconventional petroleum resources. Here we provide an overview of available new datasets and insights into the stratigraphy of the Officer Basin. Further analysis is underway including well log digitisation, fluid inclusion analysis and a petrographic report on Officer Basin wells. This work is expected to further improve geological knowledge and reduce the energy exploration risk of the Officer Basin, a key focus of this program. <b>Citation: </b>Carr L. K., Henson P., Wang L., Bailey A., Fomin T., Boreham C., Edwards D., Southby C., Symington N., Smith M., Halas L. & Jones T, 2022. Exploring for the Future in the Officer Musgrave region. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://dx.doi.org/10.26186/146988

The Onshore Basin Inventory is a summary of data and geological knowledge of hydrocarbon-prone onshore basins of Australia. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins. Under the Exploring for the Future (EFTF) program, Geoscience Australia expanded this work to compile the Onshore Basin Inventory volume 2, which covers the Officer, onshore Canning and Perth basins. These reports provide a whole-of-basin inventory of geology, petroleum systems, exploration status and data coverage. Each report also summarises aspects that require further work. The Onshore Basin Inventory has provided scientific and strategic direction for pre-competitive data acquisition under the EFTF energy work program. Here we provide an overview of the Onshore Basin Inventory, with emphasis on its utility in shaping the EFTF energy systems data acquisition and analysis program. <b>Citation:</b> Carr, L.K., Bailey, A.H.E., Palu, T.J. and Henson, P., 2020. Onshore Basin Inventory: building on Geoscience Australia’s pre-competitive work program with Exploring for the Future In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

Shale gas plays require technology such as fracture stimulation to increase rock permeability and achieve commercial rates of flow. The brittleness of shales are a major control on the ease of fracture stimulation. The Brittleness Index (BI) is a proxy for rock strength, based on geomechanical parameters, and/or rock mineralogy, and provides an indication of hydraulic stimulation effectiveness. Legacy drill core does not always have the geophysical logs needed for assessment of shale brittleness, therefore mineralogical and geochemical derived proxies for shale brittlenesss are often used with varying success. Shales from the Paleoproterozoic Lawn Hill Platform of north-west Queensland and the Northern Territory are known to contain organic-rich sedimentary units with the potential to host shale-gas plays. The Egilabria 2 DW1 well demonstrated a technical success in flowing gas from the Lawn Supersequence and recent geomechanical logging in the Egilabria prospect have demonstrated the presence of brittle rocks favourable for fracture stimulation with similarities between logged geophysics and X-Ray Diffraction (XRD) derived brittleness (Bailey et al., 2019). In this study we assess the brittleness of shales from twelve wells across the Isa Superbasin that do not have geophysical log data using XRD, major elemental analyses from X-Ray Fluorescence (XRF) and mineral carbon (MinC) techniques. The results of this study demonstrate highly variable mineral components between all analysed supersequences. The brittleness index (BI) of the shales derived from XRD ranges from ductile to brittle with zones of brittle shales present in all supersequences. Shale brittleness is controlled by increasing quartz and decreasing clay content with little influence from carbonates. Major elements based on XRF showed moderate to poor correlations to mineral type and the brittleness index was significantly higher than the results calculated by XRD. XRF analyses are not recommended as a proxy for shale brittleness in the Isa Superbasin region. The MinC parameter was highly effective as a proxy for carbonate based on comparisons with XRD derived carbonate concentrations. An important finding in this study is the variations in BI and TOC between supersequences, and within supersequences. This is evident down-hole and spatially across the area sampled. Future work is needed to investigate sweet spots for shale gas production.

A key challenge in exploring Australian onshore sedimentary basins is limited seismic data coverage. Consequently, well logs are often the main datasets that can be used to understand the subsurface geology. The primary aim of this study was to develop a methodology for visualising the three-dimensional (3D) tectonostratigraphic architecture of sedimentary basins using well data, which can then be used to quickly screen areas warranting more detailed studies of resource potential. This project has developed a workflow that generates 3D well correlations using sequence stratigraphic well tops to visualise the regional structural and stratigraphic architecture of the Amadeus, Canning, Officer and Georgina basins in the Centralian Superbasin. Thirteen Neoproterozoic‒Paleozoic supersequence tops were interpreted in 134 wells. Three-dimensional well correlations provide an effective regional visualisation of the tectonostratigraphic architecture across the main depocentres. This study redefines the Centralian Superbasin as encompassing all western, northern and central Australian basins that had episodically interconnected depositional systems driven by regional subsidence during one or more regional tectonic events between the Neoproterozoic and middle Carboniferous. The Centralian Superbasin began to form during Neoproterozoic extension, and underwent several phases of partial or complete disconnection and subsequent reconnection of depositional systems during various regional tectonic events before final separation of depocentres at the culmination of the Alice Springs Orogeny. Regional 3D correlation diagrams have been generated to show the spatial distribution of these supersequences, which can be used to visualise the distribution of stratigraphic elements associated with petroleum, mineral and groundwater systems. <b>Citation: </b>Bradshaw, B., Khider, K., MacFarlane, S., Rollet, N., Carr, L. and Henson, P., 2020. Tectonostratigraphic evolution of the Centralian Superbasin (Australia) revealed by three-dimensional well correlations. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

This fact sheet sets out the goals, vision and benefits of the Exploring for the Future program, as well as the ways we conduct fieldwork and what the information gathered is used for.